| CLOSURES & CASES |
| 3m Fibrdome Closure |
| Protects fiber from the elements while providing fast and
easy no-cost re-entry. Weatherproof, water-tight and U.V. resistant. Re-entry is a breeze. Just pull the latch. No special tools needed. Can be installed in above-ground pedestals, hand-holes and mounted on poles and strands. Splices are enclosed in a polypropylene dome clamped together with a stainless steel latch and sealed with an O-ring. Pre-stretched tubing is slipped over the base of the closure and onto a gel-sealing collar. Included in All Closures: 1 Transition Tray and 1
Splice Tray. |
|
| Keptel Closure |
| Weatherproof, water-tight and U.V. resistant. Great for all
aerial, burial and pdestal applications. Using 3 splice trays the closure holds 36 single fused fibers or 96 mass fused ribbon fibers. Included in Kit: Main Core Frame with Five Pillow Blocks and
Seals, Pressure Valve, Cable Sheath Clamps, |
|
| 3M 2178 Splice Case |
| Protect your fiber optic splices with the 3M 2178 Splice
Case.The rigid non-filled case withstands moisture, temperature extremes, cable flexing, and is flame retardant. Requires no special tools or complicated training for installation. Four cable entry ports (2 per end) accomodate 0.4 to 1" diameter fiber. The 2180 re-entry kit has all materials needed for re-entry. Aerial bracket kit has the materials for aerial installation. Included in Re-entry Kit: 2 plugs,
2 hose clamps, 8 cable ties (4 green & 4 blue), 1 hex key, 48 sealing washers, |
|
![]() |
| BACK | HOME PAGE |
MAIN
MENU OF SECTION |
TABLE OF CONTENTS |
NEXT |