detection equipment

DETECTION EQUIPMENT

Laser Precision Fiber Identifier

Simple and non-destructive signal detection for jacketed fiberoptic cable. The
LP Fiber identifier ndicates the presence and direction of traffic on fiber. Works
on jacketed or bare fiber singlemode or multimode fiber types. Also detects
modulated or CW signal. Unit interfaces with the LP 5025 Optical Power Meter.

NOTE: You must have the Laser Presicion LP5025 series Optical Power Meter
in order to operate the LP AM-450.

Description	Part #	Ref #	Price
LP Fiber Identifier	319046	AM-450	$740

Mini LID System (Local Injection Detection)

Portable unit has an LCD display and is not much bigger than a video cassette. Works with both singlemode and multimode
with coating diameters of ² 250µm. Provides optical port for pigtail usage. System comes with five pigtail adapters: ST, SC,
FC, D4 and Biconic. Also included are instructions and a carrying case. Please Call For Full Specs.

Description	Part #	Ref #	Price
Mini LID System	540171	F1-8118	$2995

Wilcom Fiber Identifier

Works with 250µm or 900µm fiber, 3mm colored patchcords and ribbon fiber. Simply insert fiber into guide and as the
unit gently and safely bends fiber just enough to detect light presence and traffic direction. Unit also detects 270Hz, 1kHz
and 2kHz modulated carrier tone. Operates on one 9v battery (included). types simply use a patch cord and mating sleeve.

Description	Part #	Ref #	Price
Wilcom Fiber Identifier	540407	F6121A	$ 1546.75

Fiber Continuity Tester

This flashlight style hand-held unit is rugged, low cost and easy to use. After you connect to an ST or SMA connector*,
and click the rear switch on, a red LED light transmits across fiber to end. Red light is easily seen, especially when you
have a handfull of cable ends. Uses 2 "C" batteries.

*for other connector types simply use a patch cord and mating sleeve.

Description	Part #	Ref #	Price
ST Continuity Tester	540172	F1-5000	$ 34.45
SMA Continuity Tester	540173	F1-5000sma	$ 34.45

Visual Fault Finder

Operates with a 4mw laser that transmits 670nm of red light. The Visual Fault Finder actually lets you see if there are breaks
or macrobends in the fiber because the intensity of light is that strong. The red laser light can be seen through a 3mm PVC
jacket if there is a break or macro-bend in the cable. Works where OTDR cannot because of dead zones. Great for detecting,
isolating and optimizing you fiber breaks. Also works as a continuity tester. Operates on one 9v battery (included).

Optimized for Singlemode=SM

Optimized for Multimode=MM

Description	Part #	Ref #	Price
SM/MM - with ST Connector	548174	OF-1000S	$ 672.75
MM - with ST Connector	548175	OF-1000M	$ 672.75
SM - with FC Connector	548176	OF-1000SFC	$ 672.75

Infrared Detection Card

Special phosphorous compound glows when infrared light is shined on to the card. Smaller than a credit card,
It can detect 850nm wavelength light or 1300/1550 wavelength light. Lasts for years.

Description	Part #	Ref #	Price
850nm Detection Card	548177	F1-4101	$ 9 95
1300/1550nm Detection Card NOT AVAILABLE AT THIS TIME	548178	F1-4103	$ 9 95