misc. test equipment

MISC. TEST EQUIPMENT

ByteBrothers

Real World Certifier

10MB, 100MB, Gigabit tester for Cables and LAN devices.

Speed tests, cable propagation delay, cable skew, cable typing (Cat 3, 5, 5E, 6),

Attenuation, cable verification, high accuracy TDR, LAN device tester,

Tone Generator/Probe. Cheapest price out there.

Description

Buy Part #

Ref #

Price

BUY NOW

Gigabit tester for cables

and Lan devices.

851610

RWC1000

RWC1000K

$497.00

BUY NOW

WHY IS THE REAL WORLD CERTIFIER IDEAL FOR LAN MANAGERS AND CABLE INSTALLERS?

LOOK AT THE BENEFITS:

PERFORMANCE CERTIFY AND TROUBLESHOOT ALL LAN HARDWARE AND CABLING.
COMPATIBLE WITH ALL 1OMB, 100MB AND GIGABIT NETWORKS!
TEST EXISTING CABLES FOR HIGHER SPEED COMPATIBILITY
SPOT FAULTY WIRING CLOSET JUMPERS FROM YOUR OFFICE WALL OUTLET
DETECT WORN CONNECTORS AND FAULTY TERMINATIONS
IDENTIFY EXCESSIVELY NOISY CABLES
DECODE 10/100/GIG PCs, SWITCHES AND HUBS FOR ADVERTISED CAPABILITY
GO "INLINE" BETWEEN TWO LAN DEVICES AND IDENTIFY THE NEGOTIATED SPEED
TEST 10/100/GIGABIT PCs, SWITCHES AND HUBS FOR ADEQUATE SIGNAL LEVELS
PERFORM YOUR OWN INSPECTION ON NEWLY PURCHASED DEVICES AND CABLES
IDENTIFY NETWORK BOTTLENECKS CAUSED BY SLOW RUNNING LINKS
PRINT "RECEIPT" TO DOCUMENT TEST RESULTS

TVR10/100 10Base-T/100Base LAN Tester. LAN device tester

Tone Generator/Probe; and Cable pairs tester.

Description	Buy Part #	Ref #	Price	BUY NOW
LAN Device tester	851612	TVR10/100K	$185.00	BUY NOW

The TVR10/100 is comprised of two units: The "Main unit" and the "Remote Probe." The Main unit performs the bulk of the tests such as determining the LAN device type (is it a hub or PC?) and the LAN speed (10 or 100 MB/s) without the need of the Remote Probe. The Remote Probe adds the ability to trace cable locations (by audibly tracing tones cables with all four pairs to insure compatibility with all three types of Base-T LANs.

Broad capabilities: TVR10/100 helps you locate faulty hubs, PCs or cable connections that are stopping or limiting the performance of your 10Base-T or 100Base-T LAN. Designed for both the LAN installer and repair person, it is useful documenting legacy LANs, installing and repairing LANs or adding equipment to existing LANs.

Designed specifically for 10 and 100 Base-T LANs: The TVR10/100 has been designed to test LAN devices and cabling designed to the 10 and 100 Base-T standard. This includes wiring paired to EIA(TIA)568B (also called AT&T258A or simply "AT&T"); and EIA(TIA)568A. EIA(TIA)568B is the most popular scheme for 10 and 100 Base-T cabling. EIA(TIA)568A is the most popular scheme for ISDN cabling. USOC pairing (typically used for telephones) is not compatible with the 10 or 100 Base-T standard and is therefore not tested by the TVR10/100.

TVR10/100 List of Functions
The TVR10/100 performs the following functions:

10/100 BASE-T LAN Tests. The TVR10/100 plugs into active hubs and/or PCs to verify 10Base-T or 100Base-T operation. Only the main Unit is required for these tests.

Verifies if PC is ON, if it appears as a PC and maximum speed.
Verifies if hub is ON, if it appears as a hub and maximum speed.
Verifies PC to hub speed and data transmission.
Verifies hub to hub data transmission.
Checks if straight thru or crossover patch cable is required.
Finds speed bottlenecks on 10 and 100 Base-T LANs.
On-line monitors LAN link (between two devices).

Cable Testing. The following tests are performed by the TVR10/100 Main Unit and Remote Unit (except where indicated).

Locates miswired cables.
Locates missing cables.
Locates cables that can not support 100Base-T operation (for LANs that require 4 pair wiring).*
Tests connection to hub (pairs connected to hub).*
Tests connection to PC (pairs connected to hub).*
Tests installed cables (pairs wired and type).
Tests patch cables (pairs wired and type).
Remote Probe helps locate and trace inactive cables.
Remote Probe traces active cables connected to hubs and PC without interfering with LAN performance.

*Test performed by the Main Unit only (does not require the use of the Remote Probe).

TVR570 Network

Network Tone Generator / Probe II

Locate and trace wires by placing a tone on one side of the cable and tracing the tone with

the inductive probe on the far side. The Network Tone Generator and Network Tone Probe II

are designed for RJ45 terminated cables.

Description	Buy Part #	Ref #	PRICE	BUY NOW
Network Tone Geenrator and Probe II	851613	TVR570	$114.00	BUY NOW

Network Tone Generator and Probe II: The TVR570 is the most advanced Netwrok Tone Probe / Tone Generator system ever developed:
Tone Generator Features:
• Punchdown block or any RJ45 pair... Punchdown block clips are perfect for applying the tone to a punchdown block. A built-in 8 pin breakout box allows you to apply the tone to any pair on the RJ45 jack.
• Tone Pair monitor... Displays the polarity of voltage that may exist on the pair being monitored.
• Continuity testing... Test for continuity on any pair.
Probe Features:
• Small, lightweight... Oversized pushbutton and amplified circuitry make this solid feeling probe easy to use.

STM-8 Modular Test Set

The economical and versatile hand tester

The STM-8 is capable of testing up to 900m (2,950ft) of 1, 2, 3 or 4 pair UTP cable for opens,
shorts, reversals, miswires and split pairs. Easy-to-read LCD display, and multiple remotes
allow one person to quickly test and identify up to four different cable runs from one
location. Tests T568A/B, USOC, 10Base-T, Token Ring and TP-PMD wiring configurations.
Low battery and line voltage indicators standard. Kit consists of master unit with a remote
plug along with an in-line coupler, a modular cord, Sieman's Wiring Reference Guide,
instructions, and a 9V alkaline battery all packed into a handy carrying case. Three
additional remote plugs can be purchased for multiple channel testing. Each of the four
remotes can be identified by the master unit.

Description	Part #	Price
STM-8 Hand Held Tester	851544	$210.00
Remote Plugs B, C & D	311749	$36.00

SLT-3 Modular Cable Tester

The ergonomically designed hand-held tester.

The MOD-TAP SLT3's innovative 3-in-1 design features modular jacks for testing
USOC, 568A/B and RS423 (MMJ) cabling systems providing instant identification
of most common voice and data cabling problems including shorts, opens,
reversals, and miswires. The master and remote units separate for end-to-end
testing of installed cabling & results are shown on LED display. Both pieces snap
together when not in use making it easy to carry and store. This ergonomically
designed hand-held unit is lightweight, rugged, and impact-resistant. Kit includes
a 9V alkaline battery.

Description	Part #	Price
SLT-3 Modular Cable Set	314101	$122.00

Patch-Check Plus Cable Tester

The ergonomically designed hand-held tester.

The MOD-TAP SLT3's innovative 3-in-1 design features modular jacks for testing USOC, 568A/B
and RS423 (MMJ) cabling systems providing instant identification of most common voice and data
cabling problems including shorts, opens, reversals, and miswires. The master and remote units
separate for end-to-end testing of installed cabling & results are shown on LED display. Both pieces
snap together when not in use making it easy to carry and store. This ergonomically designed
hand-held unit is lightweight, rugged, and impact-resistant. Kit includes a 9V alkaline battery.

Description	Part #	Price
Patch Check Plus	851542	$268.00

10 Base-T MultiTester

Specifications:

Indicators - (21) LEDs: (16) for cable testing, (2) for Link Pulse Detection, (1) for Data,
(1) fir Tip/Ring or Hub/DTE, (1) for Power.
Connectors - (2) RJ45 female
Power - (1) 9V Battery
Size - 4.5"H x 2.8"W x 1"D (11.4 x 7.1 x 2.5 cm)
Weight - 0.5 lb. (0.23 kg)

Description	Part #	Price
10 Base-T MultiTester	851609	$175.00