transition networks

TRANSITION NETWORKS

	10Base-2 to Fiber SMA		Fast Ethernet 100Base-TX to 100Base-FX

	Connect a 10Base-2 segment to a fiber optic segment and extend network distance up to 2000 meters (6600 feet) with the Coax to Fiber Media Converter. Easily connect an existing 10Base-2 segment or device to an Ethernet Fiber Optic backbone. Switch selectable coax termination: 50 ohm, 25ohm, or NO termination.		Increase the flexibility of your Ethernet cabling installation by connecting a 100Base-T twisted pair device to a 100Base-FX compliant port that has either an ST or SC fiber optic connector. Extend the network distance between two 100Base-T devices using the converters back-to-back such as full duplex switch and a file server up to 2000 meters (6600 feet).

	10Base-2 to 10Base-T		10Base-T to 10 Base-FL

	Transition's Coax to 10Base-T Media Converter reduces the price per port when installing a 10Base-T network with existing coax cabling. This unit can support up to 24 devices daisy chained on one coax segment (per twisted pair segment). External terminator switch allows the user to either connect it directly onto a coax terminal.		Designed to allow direct conversion of 10Base-T devices to fiber optic cabling over Ethernet utilizing the IEEE 802.3 10Base-FL standard, this Bi-directional converter allows 10Base-T nodes or hubs at distances up to 2 kilometers without adding delay. Plug and Play compatibility with other 10Base-FL FOIRL, and older AT&T Starlan UTP Ethernet equipment is guaranteed since it is compliant with the 10Base-FL and 10Base-T standards.

	10Base-2 to Fiber ST		10Base-T to Fiber 8 Port

	Make the transition from thin to fiber easy with this media converter. Just hook your existing thin network through the converter and take advantage of the longer distance available through fiber optics (up to 2000meters). You can connect a 10Base-2 device or a thin coax segment to a fiber optic device or a fiber hub. The functions as a media converter therefore you won't lose a repeater budget. This compact unit measures up at only 2.75"x 2.25"x 0.95" (7.0cm x 5.6cm x 2.3cm), has switch selectable coax termination of 50 ohm, 25 ohm or none and has three status LEDs; Main: Power & Jabber; Fiber: Receive, Link & Collision and Coax: Collision & Receive.		The 10Base-T to Fiber full duplex media converter connects a UTP segment to 10Base-FL compliant ports (either ST or SMA) with the added capability of supporting the faster line speeds of full duplex installations. Now you can connect an existing 10Base-T segment or device, such as a printer that does not support a fiber optic connection, to an Ethernet Fiber Optic backbone. When two of these converters are used back to back, they can extend the distance between two 10Base-T devices up to 2000 meters (6600 feet) without using a repeater!The new 10Base-T to Fiber 8 port Media Converter provides 8 connections with power one supply. A more economical solution than 8 separate converters when many connections are needed. Simple installation.